ISO Certificates

CUE DEE is certified according to ISO 14001:2004.
Our environmental guide emanates from the Natural step’s four conditions to obtain a sustainable society.

These are:
To prevent increasing concentrations of substances extracted from the earth’s crust into the environment.
To prevent increasing concentrations of substances produced by society into the environment.
To avoid intrusion on the environment physically.
Not to create obstacles that prevent people from satisfying their needs.
Concentrations of substances extracted from the earth’s crust
Concentrations of substances produced by society
Degradation by physical means
and people are not subject to conditions that systematically undermine their capacity to meet their needs

We act according to these environmental aspects:
To minimize the material consumption
To minimize the emissions in connection with transports

Our environmental goals:
Reduction of aluminium or steel with at least 5% on at least one major product.

CUE DEE acts according to OHSAS 18001:2007.
We find it essential to maintain an internal safety and an overall company environment that won’t expose our employees to unnecessary risks.

We annually measure and report the employees’ satisfaction index. The set goal is 85%.


2009 65%
2010 80%

CUE DEE is certified according to ISO 9001:2008.
Our quality system serves as a guide for the entire CUE DEE operation and is based on specified customer demands.

Annual customer surveys ensure that we always keep up-to-date with the changing customer needs and demands.

Cost efficient solutions

CUE DEE acts according to ISO EN 1090-1
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in annex ZA of the standard.

EN 1090-1:2009+A1:2011
under system 2+ for the performances set out in this certificate are applied and that the factory production control fulfils all the prescribed requirements for these performances.

This certificate was first issued on 2014-11-11 and will remain valid as long as the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared essential characteristics, do not change, and the construction product, and the manufacturing conditions in the plant are not modified significantly, unless suspended or withdrawn by the product certification body.